After each use, clean off any residue in the bath with hot, soapy water and dry with a soft cloth. Jets should be cleaned with a cotton bud or small washing up brush to remove any grime around them. Especially in hard water areas, regular cleaning is essential to prevent the build-up of ugly limescale deposits. Once every 6 weeks or so, clean the jet system out fully using a whirlpool bath cleaner.
- Fill the bath and run with cold water, with the air control off
- Run for 10 minutes; ensure the room is well-ventilated
- Empty the bath and refill and then rinse
This should stop any build-up of bacteria within the jet system and keep your bath and pipework fresh. Don't use ordinary household cleaners or detergents, as these can harm your system as well as your skin.
The real key to maintaining a beautiful fresh whirlpool bath is regular care and prompt cleaning.
No comments:
Post a Comment